Please use this identifier to cite or link to this item: http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/525
Title: Properties study of waste PA12/Hemp fiber/ZrO2 composite.
การศึกษาสมบัติวัสดุเชิงประกอบจากพอลิเอไมด์12 ใช้แล้ว/เส้นใยกัญชง/เซอร์โคเนียมออกไซด์ 
Authors: SIRINTHIP SOMSRI
ศิรินทิพย์ สมศรี
JIRATTI TENGSUTHIWAT
จิรัฐติ เต็งสุทธิวัฒน์
King Mongkut's University of Technology North Bangkok
มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
SUCHART SIENGCHIN
สุชาติ เซี่ยงฉิน
jirattit@kmutnb.ac.th
sucharts@kmutnb.ac.th
Keywords: Polyamide 12
 Hemp fiber
 Nano-zirconium oxide
 Composite
 Mechanical test
พอลิเอไมด์12
 เส้นใยกัญชง
 นาโนเซอร์โคเนียมออกไซด์
 วัสดุเชิงประกอบ
 การทดสอบสมบัติเชิงกล
Issue Date: 6-Nov-2026
Publisher: King Mongkut's University of Technology North Bangkok
Abstract: This research examines the mechanical properties and low-velocity impact behavior of composites produced from waste Polyamide 12 (PA 12) intended for 3D printing, reinforced with randomly oriented hemp fibers. The optimal hemp fiber content was determined to be 10 wt%, which was subsequently used to develop composites containing nano-zirconium oxide (nano-ZrO2) at 0, 3, 6, 9, and 12 (wt%). The samples were fabricated via compression molding at 185 °C and 4000 psi, and evaluated through tensile, flexural, and drop-weight impact tests, as well as hardness measurements, Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and Scanning Electron Microscopy (SEM).The incorporation of hemp fibers significantly improved the tensile properties of the PA 12 matrix. The composite containing 6 wt% nano-ZrO2 exhibited the highest tensile modulus, increasing by 6.81% compared to neat PA 12, and achieved the highest flexural strength, with a 45.38% improvement. Although neat PA 12 demonstrated the greatest energy absorption under drop-weight impact due to its inherent elasticity, the 6 wt% nano-ZrO2 composite provided the best overall property balance, withstanding a maximum impact force of 962 N.These results demonstrate the potential of nano-zirconium oxide as an effective additive for enhancing the mechanical performance of waste PA12-based composites.
การศึกษานี้ศึกษาสมบัติเชิงกลและแรงกระแทกความเร็วต่ำ (Low-velocity impact) ของ      วัสดุผสมที่ทำจากพอลิเอไมด์ 12 (PA 12) เกรดสำหรับการพิมพ์สามมิติที่ไม่ใช้งานแล้ว เสริมด้วยเส้นใยกัญชงที่เรียงตัวแบบสุ่ม งานวิจัยนี้ได้หาปริมาณเส้นใยกัญชงที่เหมาะสมและเลือกใช้เส้นใยกัญชงที่ 10wt% มาทำการพัฒนาต่อ โดยใส่สารเติมแต่งนาโนเซอร์โคเนียมออกไซด์ นาโนเซอร์โคเนียมออกไซด์ถูกผสมลงในเมทริกซ์ PA 12 ที่แตกต่างกันคือ 0%, 3%, 6%, 9% และ 12% โดยน้ำหนัก ตัวอย่างวัสดุผสมถูกขึ้นรูปโดยการอัดขึ้นรูปที่อุณหภูมิ 185°C และ 4000 psi ได้ทำการวิเคราะห์แรงดึง แรงดัด และแรงกระแทกแบบ Drop Weight การวัดความแข็ง การวิเคราะห์ Differential Scanning Calorimetry (DSC) การวิเคราะห์เชิงกลแบบไดนามิก (DMA) และกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราด (SEM) จากผลการศึกษาชี้ให้เห็นว่าการผสมเส้นใยกัญชงช่วยเพิ่มสมบัติแรงดึงของเมทริกซ์ PA 12 อย่างมีนัยสำคัญ วัสดุผสมที่มีนาโนเซอร์โคเนียมออกไซด์ 6% โดยน้ำหนัก แสดงให้เห็นถึงมอดูลัสของแรงดึงสูงสุด โดยเพิ่มขึ้น 6.81% เมื่อเทียบกับ PA 12 วัสดุเชิงประกอบนาโนเซอร์โคเนียมออกไซด์ 6% โดยน้ำหนักยังแสดงให้เห็นถึงความแข็งแรงดัดสูงสุด โดยเพิ่มขึ้น 45.38% เมื่อเทียบกับ PA 12 ธรรมดา ในการทดสอบแรงกระแทกแบบน้ำหนักตกกระทบ พบว่า PA 12 ธรรมดาดูดซับแรงและพลังงานได้ดีที่สุดเนื่องจากความยืดหยุ่นตามธรรมชาติ อย่างไรก็ตามวัสดุเชิงประกอบนาโนเซอร์โคเนียมออกไซด์ 6% แสดงให้เห็นถึงความสมดุลของคุณสมบัติที่ดีที่สุดเมื่อเทียบกับการทดสอบน้ำหนักตกกระทบ โดย ทนต่อแรงสูงสุดที่ 962 นิวตัน ผลการวิจัยเหล่านี้เน้นย้ำถึงศักยภาพของการใช้นาโนเซอร์โคเนียมออกไซด์ เพื่อเพิ่มประสิทธิภาพเชิงกลของวัสดุเชิงประกอบ PA 12 ที่ไม่ใช้แล้ว
URI: http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/525
Appears in Collections:COLLEGE OF INDUSTRIAL TECHNOLOGY

Files in This Item:
File SizeFormat 
s6503017810091.pdf4.11 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.