Please use this identifier to cite or link to this item:
http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/534Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor | RATCHAPON NILPRAPA | en |
| dc.contributor | รัชพล นิลประภา | th |
| dc.contributor.advisor | JENNARONG TUNGTRONGPAIROJ | en |
| dc.contributor.advisor | เจนณรงค์ ตั้งตรงไพโรจน์ | th |
| dc.contributor.other | King Mongkut's University of Technology North Bangkok | en |
| dc.contributor.other | มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ | th |
| dc.date.accessioned | 2026-11-06T03:08:27Z | - |
| dc.date.available | 2026-11-06T03:08:27Z | - |
| dc.date.created | 2026 | - |
| dc.date.issued | 2026-11-06 | - |
| dc.identifier.uri | http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/534 | - |
| dc.description.abstract | The biomass energy industry is gaining attention as a key alternative energy source for the country to replace fossil fuels. This process involves heating agricultural waste, such as crop fibers or plastic waste, to break the molecular bonds in biomass and produce various oil products and synthesis gas at temperatures between 500 and 1400 degrees Celsius. However, equipment and components used in the process, such as superheater tubes (SHT) and supercritical water reactors (SCWR). The research aims to develop oxide dispersion-strengthened steels (Fe-18Cr) containing nano-oxides of Al2O3, Y2O3, and ZrO2 at 0.5–3.0 wt% for use in humidified atmospheres at 600–800 °C. The physical and mechanical characterization of the ODS steels was observed after the high-temperature degradation tests. In addition, the corrosion resistance of the ODS steels was examined by electrochemical tests. The density and porosity of all ODS samples were 7.35 ± 0.05 g cm-3 (relative density: 0.98 ± 0.04) and 4.97 ± 1.29 % after sintering processes. After the high-temperature degradation test, the average density increased by 1.5 times. Notably, the nano-oxides were found at the interface between Fe and Cr phases. The Fe-18Cr-Al2O3 showed the lowest oxidation rate, lower than those of Fe-18Cr-Y2O3 and Fe-18Cr-ZrO2. The parabolic oxidation rate constant of the ODS steels increased with increasing nano-oxide ratio. The Fe-18Cr-3.0Y2O3 exhibited superior microhardness and corrosion resistance compared to other ODS steels. Thus, it is a candidate material for combating high-temperature degradation in humidified atmospheres in biomass power plants. | en |
| dc.description.abstract | อุตสาหกรรมการผลิตพลังงานจากชีวมวลกำลังได้รับความสนใจในการผลิตพลังงานทางเลือกหนี่งที่สำคัญของประเทศเพื่อทดแทนการใช้พลังงานจากเชื้อเพลิงฟอสซิล ซึ่งกระบวนการนี้จะเป็นการให้ความร้อนแก่ผลผลิตที่เหลือจากการเกษตรหรือขยะพลาสติกเพื่อเปลี่ยนเป็นผลิตภัณฑ์น้ำมันในรูปต่างๆและแก๊สสังเคราะห์ที่อุณหภูมิระหว่าง 500 – 1400 องศาเซลเซียส อย่างไรก็ตาม อุปกรณ์และชิ้นส่วนในกระบวนการผลิต เช่น ท่อให้ความร้อนแก่ไอน้ำอิ่มตัวและเตาปฏิกรณ์ผลิตไอน้ำแรงดันเหนือวิกฤต อาจเกิดการเสื่อมสภาพและสมบัติเชิงกลได้ภายใต้สภาวะความดันและอุณภูมิสูงในบรรยากาศที่มีไอน้ำและแก๊สเผาไหม้ วิทยานิพนธ์นี้จึงมุ่งเน้นพัฒนาโลหะผสม Fe-18Cr ที่เสริมแรงด้วยอนุภาคนาโนออกไซด์ (Oxide dispersion strengthened steels, ODS) ของ Al2O3 Y2O3 และ ZrO2 ที่สัดส่วน 0.5 – 3.0 เปอร์เซ็นต์โดยน้ำหนัก เพื่อใช้งานภายใต้สภาวะการเสื่อมสภาพที่อุณหภูมิสูง โดยทำการทดสอบในบรรยากาศที่มีไอน้ำสูงที่อุณหภูมิ 600 – 800 องศาเซลเซียส และตรวจสอบลักษณะสมบัติทางกายภาพและเคมีรวมถึงสมบัติเชิงกลภายหลังการทดสอบ อีกทั้งทดสอบสภาพการกัดกร่อนด้วยเทคนิคทางไฟฟ้าเคมี ผลการทดลองพบว่าความหนาแน่นของชิ้นงานทุกประเภทมีค่าประมาณ 7.35 ( 0.05 g cm-3 (ความหนาแน่นสัมพัทธ์: 0.98 ( 0.04) ภายหลังอบซินเทอร์ และมีความพรุนตัวที่ 4.97 ± 1.29 เปอร์เซ็นต์ ซึ่งค่าความหนาแน่นเฉลี่ยเพิ่มขึ้นประมาณ 1.5 เท่าภายหลังการทดสอบการเสื่อมสภาพที่อุณหภูมิสูง โดยอนุภาคนาโนออกไซด์ส่วนใหญ่ปรากฏบริเวณรอยต่อระหว่างเฟสโลหะหลัก ภายหลังการทดสอบการเสื่อมสภาพ พบว่าค่าคงที่อัตราการเกิดออกซิเดชันของโลหะผสมลดลงมากสุดเมื่อเติมอนุภาคนาโน Al2O3 และรองลงมาเมื่อเติมอนุภาคนาโน Y2O3 และ ZrO2 ตามลำดับ และอัตราการเกิดออกซิเดชันมีแนวโน้มลดลง เมื่อเพิ่มสัดส่วนอนุภาคนาโนออกไซด์ และโลหะผสม Fe-18Cr-Y2O3 ที่สัดส่วน 3 wt% จะมีค่าความแข็งระดับจุลภาคและความสามารถต้านทานการกัดกร่อนภายหลังการเสื่อมสภาพที่ดีที่สุดเมื่อเปรียบเทียบกับโลหะผสมชนิดอื่น ซึ่งสามารถใช้เป็นวัสดุทางเลือกหนึ่งในการเพิ่มประสิทธิภาพของชิ้นส่วนอุปกรณ์ที่ใช้ในบรรยากาศที่มีไอน้ำที่อุณหภูมิสูงได้ | th |
| dc.language.iso | THA | - |
| dc.publisher | King Mongkut's University of Technology North Bangkok | - |
| dc.rights | King Mongkut's University of Technology North Bangkok | - |
| dc.subject | Oxide dispersion strengthened steels | en |
| dc.subject | High temperature degradation | en |
| dc.subject | Nano oxide | en |
| dc.subject | Humidified atmosphere | en |
| dc.subject | Biomass power plant | en |
| dc.subject | เหล็กผสมเสริมแรงด้วยอนุภาคนาโนออกไซด์ | th |
| dc.subject | การเสื่อมสภาพที่อุณหภูมิสูง | th |
| dc.subject | อนุภาคนาโนออกไซด์ | th |
| dc.subject | บรรยากาศที่มีไอน้ำ | th |
| dc.subject | อุตสาหกรรมการผลิตพลังงานจากชีวมวล | th |
| dc.subject.classification | Materials Science:Ceramics and Composites | en |
| dc.title | Oxide dispersion strengthened steels with high chromium for high-temperature degradation resistance in biomass power plants | en |
| dc.title | สภาพการต้านทานการเสื่อมสภาพที่อุณหภูมิสูงของเหล็กกล้าผสมโครเมียมที่เสริมแรงด้วยอนุภาคนาโนออกไซด์ในอุตสาหกรรมผลิตพลังงานจากชีวมวล | th |
| dc.type | Thesis | en |
| dc.type | วิทยานิพนธ์ | th |
| dc.contributor.coadvisor | SAOWALUK CHALEAWLERT-UMPON | en |
| dc.contributor.coadvisor | เสาวลักษณ์ เฉลียวเลิศอำพล | th |
| dc.contributor.emailadvisor | jennarongt@kmutnb.ac.th | - |
| dc.contributor.emailcoadvisor | saowaluk@nanotec.or.th | - |
| dc.description.degreename | Master of Engineering (วศ.ม.) | en |
| dc.description.degreename | วิศวกรรมศาสตรมหาบัณฑิต (M.Eng.) | th |
| dc.description.degreelevel | Master of Engineering | en |
| dc.description.degreelevel | วิศวกรรมศาสตรมหาบัณฑิต | th |
| dc.description.degreediscipline | Materials Engineering | en |
| dc.description.degreediscipline | วิศวกรรมวัสดุ | th |
| Appears in Collections: | FACULTY OF ENGINEERING | |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| s6501062810036.pdf | 12.11 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.