Please use this identifier to cite or link to this item:
http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/481| Title: | Comparative study of anisotropic plastic deformation using various constitutive material models and ductile fracture criteria for sheet hydroforming in large motorcycle fuel tank manufacturing การศึกษาเชิงเปรียบเทียบการเปลี่ยนรูปพลาสติกแบบแอนไอโซทรอปิกภายใต้แบบจำลองพฤติกรรมของวัสดุและเกณฑ์ความเสียหายที่แตกต่างกันสำหรับการขึ้นรูปแผ่นโลหะด้วยแรงดันของเหลวในการผลิตถังน้ำมันเชื้อเพลิงรถจักรยานยนต์ขนาดใหญ่ |
| Authors: | DUJTHEP KUMPUNYA ดุจเทพ คำปัญญา SANSOT PANICH แสนสด พานิช King Mongkut's University of Technology North Bangkok มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ sansotp@kmutnb.ac.th |
| Keywords: | Combined Isotropic-Kinematic YU-model Yld2000-2d Yoshida2013 Sheet Hydroforming DF2016 Hosford-Coulomb. การครากแบบ Combined Isotropic-Kinematic YU-model เกณฑ์การคราก Yld2000-2d เกณฑ์การคราก Yoshida2013 กระการขึ้นรูปโลหะแผ่นด้วยของไหลแรงดัน เกณฑ์ความเสียหาย DF2016 เกณฑ์ความเสียหาย Hosford-Coulomb |
| Issue Date: | 5-Nov-2026 |
| Publisher: | King Mongkut's University of Technology North Bangkok |
| Abstract: | This research aimed to conduct a comparative study the efficiency of prediction and formability evaluation of SPC270 with a 0.9-mm-thick mild steel sheet undergoing sheet hydroforming for a large motorcycle fuel tank part. In the numerical finite element (FE) simulation, material models employing various yield criteria were used Hill’48, Yld2000-2d, and Yoshida2013. Hardening laws were the Hybrid Swift-Voce (HSV) and Hybrid Hocket-Sherby (HSHS). Moreover, YU model was the cyclic hardening law for the Combined Isotropic-Kinematics Hardening (IKH), and compared to Isotropic Hardening (IH) yielding assumptions. On the other hand, fracture assessment was performed through stress paths, strain paths, or stress-strain paths at the crucial region with the limitation of FFLC, FFLSC, and FLs. Base on theorical ductile facture criteria employment, have known as DF2016 and Hosford-Coulomb, these two mathematical models were utilized to establish FLs and FFLSCs. Subsequently, performance in each predictive model was indicated by High deviation, final sheet thickness, drawn-in for FE simulation and the intersection value between loading path and the limit curve for the fracture assessment. As the comparative results, Yld2000-2d provided the most accurate predictions while Yoshida2013 provide accepted performance. In the hardening assumption, YU model in IKH provided better result than conventional IH. However, there is slightly different output when the isotropic hybrid hardening law was changed. In the formability assessment, both three spaces were able to capture failure moment of the deformed part. However, FFLSCs has the most consistency with final value of the path while FFLCs and FLs has faster sensitive to location fracture. Additionally, FFLCs are as well as FLs to predict fracture in this sheet hydroforming part. งานวิจัยนี้มีวัตถุประสงค์ในการศึกษาเปรียบเทียบการทำนายการขึ้นรูปและการประเมินสภาพความเสียหายของเหล็กกล้าละมุน SPC270 ความหนาแผ่น 0.9 มิลลิเมตรในกระบวนการขึ้นรูปถังน้ำมันรถจักรยานยนต์ขนาดใหญ่ด้วยของไหลแรงดัน (Hydro Forming) การพัฒนาแบบจำลองด้านวัสดุจะศึกษาเปรียบเทียบกันของเกณฑ์การคราก Hill’48 Yld2000-2d และ Yoshida2013 สมมติฐานการครากจะเปรียบเทียบกันระหว่าง Isotropic Hardening; IH และ Combined-Isotropic-Kinematic Hardening (IKH) โดยที่เส้นโค้งความเค้นไหลแบบ IH จะใช้แบบจำลองผสม Hybrid-Swift-Voce (HSV) และ Hybrid-Hocket-Sherby (HSHS) สำหรับเส้นโค้งความเค้นไหลแบบวัฏจักรจะใช้แบบจำลอง YU model การประเมิณความเสียหายของชิ้นส่วนถังน้ำมันจะเป็นการประเมิณบนเส้นโค้งขีดจำกัดความเสียหายบนพื้นฐานความเครียด (FFLC) ที่ได้จากการทดสอบ Nakajima ร่มกับการดึงแกนเดียวของชิ้นงานบากขอบ เส้นโค้งขีดจำกัดความเสียหายบนพื้นฐานความเค้น (FFLSC) ที่ได้จาการคำนวณเชิงวิเคราะห์และการคำนวณเชิงทฤษฎี เส้นโค้งความเสียหาย (Fracture Locus; FLs) ที่พัฒนาการการทดสอบร่วมกับการใช้เกณฑ์ความเสียหาย DF2016 และ Hosford-Coulomb การประเมิณประสิทธิภาพในการทำนายการขึ้นรูปด้วยการจำลองด้วยระเบียบวิธีไฟไนต์เอลิเมนต์จะเป็นการเปรียบเทียบค่า High Deviation ความหนาแผ่นที่ลดลง ระยะการไหลตัวเข้าแม่พิมพ์ที่ขอบชิ้นงาน และมุมของการดีดตัวกลับ การประเมิณความแม่นยำในการทำนายความเสียหายจะเป็นการเปรียบเทียบค่าความเครียด หรือความเค้นที่จุดตัดของเส้นทางความเค้นหรือความเครียดกับเส้นขีดจำกัด จากผลการศึกษาเปรียบเทียบความแม่นยำในการจำลองกับผลการขึ้นรูปจริงจะสามารถกล่าวได้ว่า เกณฑ์การคราก Yld2000-2d จะมีความแม่นยำสูงสุดในขณะที่เกณฑ์การคราก Yoshida2013 จะมีประสิทธิภาพที่ใกล้เคียงกัน การจำลองภายใต้สมมิติฐานการครากแบบ IKH จะมีความแม่นยำกว่า IH และการใช้เส้นโค้งความเค้นไหล HSV และ HSHS จะให้ผลที่แตกต่างกันไม่มาก จากผลการประเมิณความเสียหาจะพบว่าทั้ง FFLCs FFLSCsและ FLs จะสามารถทำนายความเสียหายได้ดี แต่เมื่อคำนวณความคลาดเคลื่อนจากค่าสุดท้ายจะพบว่า FFLSCs นั้นจะมีความสอดคล้องสูงสุดในขณะที่ FFLCs และ FLs จะมีประสิทธิภาพที่ใกล้เคียงกันซึ่งสามารถทำนายได้ก่อน |
| URI: | http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/481 |
| Appears in Collections: | FACULTY OF ENGINEERING |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| s6601021956515.pdf | 27.63 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.