Please use this identifier to cite or link to this item: http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/475
Full metadata record
DC FieldValueLanguage
dc.contributorTAMNARN TAPRAKONEen
dc.contributorตำนาน ตาประโคนth
dc.contributor.advisorPREEDA CHANTAWONGen
dc.contributor.advisorปรีดา จันทวงษ์th
dc.contributor.otherKing Mongkut's University of Technology North Bangkoken
dc.contributor.otherมหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือth
dc.date.accessioned2026-11-05T03:23:53Z-
dc.date.available2026-11-05T03:23:53Z-
dc.date.created2026-
dc.date.issued2026-11-05-
dc.identifier.urihttp://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/475-
dc.description.abstractThe growing challenges of thermal discomfort, elevated indoor heat gain, and increasing electricity demand in tropical residential buildings have heightened interest in passive cooling and building-integrated energy technologies. This thesis presents extensive field investigation of concrete-based solar chimney configurations integratedwith thermoelectric modules to generate electrical current using the stored heat in the roof and wall built using local commercial materials widely used for residential houses.More precisely, the aim is to experimentally examines the thermal and ventilation performance of roof and wall concrete-based solar chimney integrated with thermoelectric power generation and compare them to a conventional fiber-cement roof and wall configurations in the hot-humid climate of Thailand. Different solar chimeny configurations are considered. The first is a Concrete Roof Solar Chimney made from undulating fiber-cement panels with Thermoelectric modules (CSRCT). Several cases were investigations by varying the number (one and ten) and alignment of TE modules. Also, two options were adopted for cooling the thermoelectric modules either naturally by the chimney induced ventilation or assisted using two small DC fans connected directly to a small Photovoltaic (PV) panel. The second series considered a Lightweight Solar Wall Chimney with a thermoelectric module (LSWCT).The thermal performances of these different configurations of concrete-based solar chimneys are compared to a Simple fiber-cement Roof (SFR) and a Simple Cement Wall (SCW) configuration respectively. Field tests were conducted using two small houses (2.016 m3; 1.2 m x1.2 m x 1.2 m) built using white-painted fiber cement and gypsum boards for the walls. The concrete roof faced south. The CSRCT design included two small openings at the inlet and outlet to allow ventilation. To act as a thermoelectric generator (TEG), CSRCT and LSWCTtwo series of tests were conducted by installing one and ten (model MT2-1,6-127) with dimensions of 40 mm x 40 mm on the ventilated side of the concrete roof and lightweight wall. Solar radiation, indoor, roof and wall surface temperatures, heat flux, airflow, and thermoelectric output over a typical daytime operating period were conituously recorded and analysed. The findings indicate that the CSRCT and LSWCT configurations substantially reduced roof heat conduction by approximately 29.3 %–78.8% compared to the SCR roof and SCW wall, while enhancing natural ventilation, with internal airflow increasing from 0.01–0.015 m/s to 0.013–0.75 m/s. Indoor air temperatures in the RSCCT and LSWCT houses were consistently 0.2–2.8°C lower than those in the reference structure, thereby confirming the effectiveness of buoyancy-driven airflow in alleviating attic heat accumulation. Thermoelectric modules generated between 0.12 and 1.8 mWand 0.04 to 3.16 mW power generated by the TEGs of supplementary electrical power, demonstrating the viability of simultaneous passive cooling and small-scale energy harvesting from roof surface heat. These findings underscore the RSCCT and LSWCT as practical, low-complexity, and energy-conserving roof and wall modification strategies for enhancing thermal comfort, reducing cooling loads, and promoting solar-assisted natural ventilation in tropical buildings. Future developments will focus on design optimization, scalability, and long-term performance assessment for real residential applications. Finally, this thesis demonstrated that all-concrete roof and lightweight wall configurations not only help transfer unwanted heat out of the house but also induce ventilation, which improves indoor thermal comfort and generates electrical current. The various proposed configurations of concrete roofs and lightweight walls can be applied to low-cost residential houses, offering a viable alternative for harvesting thermal energy in concrete roofs and wall buildings.en
dc.language.isoENG-
dc.publisherKing Mongkut's University of Technology North Bangkok-
dc.rightsKing Mongkut's University of Technology North Bangkok-
dc.subjectroof solar concrete chimney; lightweight solar wall chimney; save energy; heat gain reduction; thermoelectric power generation; building coolingen
dc.subject.classificationEnergy:Fuel Technologyen
dc.titleDEVELOPMENT OF CONCRETE-BASED SOLAR CHIMNEY CONFIGURATIONS INTEGRATED WITH THERMOELECTRIC MODULESen
dc.typeDissertationen
dc.typeดุษฎีนิพนธ์th
dc.contributor.emailadvisorpreedac@kmutnb.ac.th-
dc.description.degreenameDoctor of Philosophy (ปร.ด.)en
dc.description.degreenameปรัชญาดุษฎีบัณฑิต (Ph.D.)th
dc.description.degreelevelDoctor of Philosophyen
dc.description.degreelevelปรัชญาดุษฎีบัณฑิตth
dc.description.degreedisciplineEnergy Engineering Technologyen
dc.description.degreedisciplineเทคโนโลยีวิศวกรรมพลังงานth
Appears in Collections:COLLEGE OF INDUSTRIAL TECHNOLOGY

Files in This Item:
File SizeFormat 
s6503027917026.pdf2.28 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.